C-100 Half Rack
C-200 Double Rack
C-300 Cage Rack
C-220 Double Half Rack
C-400 Cage and a Half Rack
The C-200 double rack is a great option for larger rooms with the space in the middle of your weight room. This option allows you to have 2 stations in one rack. You can bridge them together if you choose to do so. Customize a drop-down header and even a header on a bridge.
We have no pull pins on this rack. There are also many options for this rack. You can add band pegs, extra bar storage, dip attachments, landlines, even custom logos. You can add a platform with this rack if desired. 8′ wide and 6′ or 4′ deep. Bench, bar, and plates are not included in the price.
SPECS
- Brand : Wright Equipment
- Use : Squat/Bench/PullUp/Power Lifting
- Weight : 750lbs
- Upright : 11ga 3″x3″ tube
- Material : Steel
- Coating : Custom Powder
- Height : 105″
- Width : Base 48″ / 56″ Including Weight Storage
- Length : 96″
- Assembly : Bolt
- Warranty : Lifetime* Welds/Structure
- Made in USA: Yes
- Options : Platform, Dip Station, Landmine
The Wright Equipment C Series is a modular rack that uses the tried and proven pin and twist method for it’s accessories. We also use our Laser cutting technology to cut the uprights for the C Series Racks. This is a simple Rack and therefore very cost effective for you the customer. We use UHMW plastic slides everywhere possible to avoid metal on metal contact to help extend the life of the powder coating. We also add standard the plastic weight peg storage sleeves. This will keep you from scratching up those pegs and keep them looking good and black for the life of the rack.
The C-200 double rack is a great option for larger rooms with the space in the middle of your weight room. This option allows you to have 2 stations in one rack. You can bridge them together if you choose to do so. Customize a drop-down header and even a header on a bridge.
There are also many options for this rack. You can add band pegs, extra bar storage, dip attachments, landlines, even custom logos. You can add a platform with this rack if desired. 8′ wide and 6′ or 4′ deep. Bench, bar, and plates are not included in the price.
SPECS
- Brand : Wright Equipment
- Use : Squat/Bench/PullUp/Power Lifting
- Weight : 750lbs
- Upright : 11ga 3″x3″ tube / Laser Cut #s
- Material : Steel
- Coating : Custom Powder
- Height : 105″
- Width : Base 48″ / 56″ Including Weight Storage
- Length : 96″
- Assembly : Bolt
- Warranty : Lifetime* Welds/Structure
- Made in USA: Yes
- Options : Platform, Dip Station, Landmine
The Wright Equipment C Series is a modular rack that uses the tried and proven pin and twist method for it’s accessories. We also use our Laser cutting technology to cut the uprights for the C Series Racks. This is a simple Rack and therefore very cost effective for you the customer. We use UHMW plastic slides everywhere possible to avoid metal on metal contact to help extend the life of the powder coating. We also add standard the plastic weight peg storage sleeves. This will keep you from scratching up those pegs and keep them looking good and black for the life of the rack.
The C-300 Cage rack is a full power rack that gives you a bigger footprint for stability. The standard Shackle and Strap gives you many options as well. A safer way to do your bench lifts or squats while relying on a 20 ton tested Strap. You can bridge them together if you choose to do so. This rack will have unlimited storage options. Customize a drop-down header and even a header on a bridge.
There are also many options for this rack. You can add band pegs, extra bar storage, dip attachments, landlines, even custom logos. You can add a platform with this rack if desired. 8′ wide and 6′ or 4′ deep. Bench, bar, and plates are not included in the price.
SPEC
- Brand : Wright Equipment
- Use : Squat/Bench/PullUp/Power Lifting
- Weight : 635lbs
- Upright : 11ga 3″x3″
- Material : Steel
- Overlay : NO
- Coating : Custom Powder
- Height : 96″
- Width : Base 48″ / 56″ Including Weight Storage
- Length : 72″
- Assembly : Bolt
- Warranty : Lifetime* Welds/Structure
- Made in USA: Yes
- Options : Platform, Dip Station, Landmine
The Wright Equipment C Series is a modular rack that uses the tried and proven pin and twist method for it’s accessories. We also use our Laser cutting technology to cut the uprights for the C Series Racks. This is a simple Rack and therefore very cost effective for you the customer. We use UHMW plastic slides everywhere possible to avoid metal on metal contact to help extend the life of the powder coating. We also add standard the plastic weight peg storage sleeves. This will keep you from scratching up those pegs and keep them looking good and black for the life of the rack.
The C-220 Double Half Rack is like the double rack but gives you twice the amount of storage as the double rack. Featuring two storage uprights for weight pegs or any other accessory. This rack is great for large rooms and accommodates two workstations. You can bridge them together if you choose to do so. Customize a drop-down header and even a header on a bridge.
There are also many options for this rack. You can add band pegs, extra bar storage, dip attachments, landlines, even custom logos. You can add a platform with this rack if desired. 8′ wide and 6′ or 4′ deep. Bench, bar, and plates are not included in the price.
SPECS
- Brand : Wright Equipment
- Use : Squat/Bench/PullUp/Power Lifting
- Weight : 850lbs
- Upright : 11ga 3″x3″ tube with Laser cut #s
- Material : Steel
- Overlay : NO
- Coating : Custom Powder
- Height : 105’’
- Width : Base 48″ / 56″ Including Weight Storage
- Length : 110″
- Assembly : Bolt
- Warranty : Lifetime* Welds/Structure
- Made in USA: Yes
Options : Platform, Dip Station, Landmine
The Wright Equipment C Series is a modular rack that uses the tried and proven pin and twist method for it’s accessories. We also use our Laser cutting technology to cut the uprights for the C Series Racks. This is a simple Rack and therefore very cost effective for you the customer. We use UHMW plastic slides everywhere possible to avoid metal on metal contact to help extend the life of the powder coating. We also add standard the plastic weight peg storage sleeves. This will keep you from scratching up those pegs and keep them looking good and black for the life of the rack.
The CX-400 double power rack is a CX-100 and CX-300 put together to create a power rack like no other. This rack gives you two workstations. One, cage station and one, half rack station. This rack is great for large rooms. You can bridge them together if you choose to do so. Customize a drop-down header and even a header on a bridge.
There are also many options for this rack. You can add band pegs, extra bar storage, dip attachments, landlines, even custom logos. You can add a platform with this rack if desired. 8′ wide and 6′ or 4′ deep. Bench, bar, and plates are not included in the price.
SPECS
- Brand : Wright Equipment
- Use : Squat/Bench/PullUp/Power Lifting
- Weight : 850lbs
- Upright : 11ga 3″x3″ tube with Laser cut #s
- Material : Steel
- Overlay : NO
- Coating : Custom Powder
- Height : 96’’
- Width : Base 48″ / 56″ Including Weight Storage
- Length : 110″
- Assembly : Bolt
- Warranty : Lifetime* Welds/Structure
- Made in USA: Yes
Options : Platform, Dip Station, Landmine